Product sheet
Description
This 3 beam anodised aluminium telescopic slide provides a total extension.
It includes a lock in & out: to open or to close the drawer, you need to press on a latch. The intermediate beam has an automated unlocking feature.
Closed : Opened :
Very slim, it has a heigth of 1U (44,5mm). It is designed for medium duty loads.
Drilling scheme
Standard closed lengths
| Extension |
on major axis |
on minor axis | Stock | CAD Files Add to cart | ||
| 200 mm | 213 mm | 60 kg | Contact us |  |
||
| 250 mm | 263 mm | 57 kg | Contact us | |
||
| 300 mm | 313 mm | 55 kg | Contact us | |
||
| 350 mm | 363 mm | 53 kg | Contact us | |
||
| 400 mm | 413 mm | 50 kg | Contact us | |
||
| 450 mm | 463 mm | 48 kg | Contact us | |
||
| 500 mm | 513 mm | 45 kg | Contact us | |
||
| 550 mm | 563 mm | 43 kg | Contact us | |
||
| 600 mm | 613 mm | 40 kg | Contact us | |
||
| 650 mm | 663 mm | 38 kg | Contact us | |
||
| 700 mm | 713 mm | 35 kg | Contact us | |
||
Technical informations
Applications
This telescopic slide is designed for medium duty applications, suchs as keyboards, protecting hoods or drawers for electronic devices that require a relativly low number of cycles. Physically very light it can be used in aerospace applications.
Recommended operation temperature from -20 to 80°C
In most of the cases, only one slide with a latch is enough to lock the drawer, this makes the assembly easy to operate. In case of vehicule use, please contact us if you think about using a slide with a locking device.
Caution: The use of aluminum slides is not recommended within applications that have high levels of vibration. If you would like advice please do not hesitate to contact us.
Caution: due to the slim profile of this slide to avoid excess friction and increased deflection we recommended that it is used only in its major axis.
Note: It is not always possible to produce shorter length slides with locking systems and the fixing hole patterns may differ.
Caution: aluminium slides are not designed for intensively cycling use.
Attention: we do not recommend this model for use in vertical (up & down) applications.
Manufacture
Chambrelan produces this telescopic guide from anodised aluminium profile.
It is supplied with a soft anodisation finish to protect against corrosion.
It includes polyamid ball cages with steel ball bearings.
It utilises rubber stops on closing.
The latches are in white zinc plated steel.
It is greased with a white grease.
Same models
This model has equivalent models, whose overall dimensions and the diagrams of drillings are close or identical:
